Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Cost in Roxbury?
Garage door repair in Roxbury typically costs between $150 and $600, depending on which component failed. A single torsion or extension spring runs $180 – $340 for one spring, and a full new door installation runs $700 – $2,200. Those are estimated ranges for the Roxbury market in 2026. The written estimate you get after a diagnosis sets the final price.
Most calls we take in Roxbury fall into one of three buckets: a spring that snapped, an opener that stopped responding, or a door that came off its track. Each has a different price band, and a few minutes of diagnosis separates a repair from a replacement. Estimates are free, so it costs nothing to find out which bucket you’re in.
Key Takeaways
- Typical garage door repair in Roxbury runs $150 – $600 for the job.
- A single spring is $180 – $340; a matched pair is usually replaced together, so expect roughly double that.
- Opener repair is $120 – $320; a new opener installed is $250 – $550.
- New door installation is $700 – $2,200, driven mostly by door size, material and insulation.
- Parts access shortens repair timelines – we source garage door components directly instead of waiting on a third-party order.
Garage Door Cost Breakdown (2026)
Here’s how the work breaks down by line item for the Roxbury market. Every range below is a typical estimate, not a fixed price. The written estimate sets the final number.
| Service | Typical Estimated Range |
|---|---|
| Garage door repair (general) | $150 – $600 |
| Spring repair (one spring) | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2,200 |
What pushes a job toward the top of its range? Two things mostly: how many components are involved, and whether the door is a model we can match parts to directly. A single spring swap sits near the bottom of its band. A snapped spring that also bent a track or stretched a cable sits at the top, because you’re now paying for two or three repairs at once. Old doors with discontinued hardware can add cost too, because the right part has to be tracked down before the work starts.
The opener side behaves the same way. A dead remote or a misaligned safety sensor is a quick fix near $120. A logic board failure on a legacy unit runs higher, and at some point the math favors a new opener at $250 – $550 rather than chasing a part on a system that’s already given you trouble. We work on LiftMaster, Chamberlain, Genie, and Craftsman units, so the odds are good we can repair what you have rather than replace it.
What Affects Garage Door Pricing in Roxbury
- Which component failed. A spring, a cable, a roller and an opener are four different jobs at four different price points. The single biggest driver of your bill is diagnosis – knowing exactly what broke before anyone quotes a number.
- Repair versus replace. A door with one bad panel, a noisy roller or a tired spring is almost always worth repairing. A door that’s rusted through, dragging on the floor, or missing hardware it was built with is a different conversation. We lead with the repair whenever the door can be fixed right.
- Door size and material. A single-car steel door and a double-wide insulated door don’t cost the same to install, and the panels don’t cost the same to replace. Roxbury’s housing stock runs from older multi-bay garages to tight single-car bays, and size moves the number.
- Brand and part availability. We service equipment from LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. Being able to source parts directly for those systems is one reason we can quote a repair instead of ordering and waiting.
- Opener type. A modern WiFi-enabled opener and a legacy chain-drive unit are wired and set up differently. Smart openers add a little diagnostic time; old units sometimes need parts that take more hunting.
- Access and clearance. Low headroom, a tight bay, or a car parked under the door changes how the work gets done. It’s a small factor, but it’s a real one on some Roxbury properties.
How to Save on Garage Door Repairs in Roxbury
The cheapest garage door job is the one you catch early. A door that starts squealing, jerking, or hesitating is telling you something is wearing out. Fixing a roller for $110 – $220 beats fixing a roller plus a bent track later. Same with openers – a remote that only works up close usually means a sensor or a battery, not a new unit.
- Get a diagnosis before a quote. A price without knowing what failed is a guess. Ask for the diagnosis in plain terms first, then the number.
- Repair before you replace. If the door structure is sound, a repair at $150 – $600 will almost always beat a new installation at $700 – $2,200.
- Handle springs and cables together. If one spring has failed, the other is usually near the end of its life too. Replacing a matched pair in one visit is cheaper than two separate calls.
- Fix the small stuff now. Rollers and tracks are the cheapest line items on this page. They’re also the ones most likely to cause a bigger failure if ignored.
- Ask about parts directly. We supply garage door components as a service, which cuts the wait and the markup that comes from a third-party order.
Every estimate we give is free. Call (877) 716-7297 and describe what the door is doing – we’ll tell you what it likely is and what it likely costs before anyone comes out.
Spring Repair Pricing: Why It Costs What It Costs
A single spring repair in Roxbury runs $180 – $340. That’s for one spring. Most residential doors run a matched pair, and pairs are usually replaced together, so a full set lands around twice that range. It’s the most common repair we’re called for, and it’s also the one we most often see attempted by someone who shouldn’t have tried.
Torsion springs are under high tension even when the door is closed. They store enough energy to cause serious injury if they let go while someone is working on them. This is not a job to tackle with a YouTube video and a set of wrenches. A trained technician uses the right winding bars, sets the tension to the door’s actual weight, and checks the balance before the door ever moves under power. Springs are not a DIY job, and the price on this page includes getting it done safely the first time.
If your door has a gap at the top, won’t lift, or made a loud bang from the garage, that’s usually a spring. One call gets a diagnosis and an estimate. For a fuller picture of what spring work involves, see our spring repair page.
Opener Pricing: Repair or Replace?
Opener repair in Roxbury runs $120 – $320 and opener installation runs $250 – $550. The question that comes up constantly is whether to repair the opener you have or put that money toward a new one. Here’s the simple version: if the unit is otherwise working and one part failed, repair it. If the unit is a legacy model that’s already had a part or two replaced, and it’s not a smart unit you want, the install range makes more sense.
We handle LiftMaster, Chamberlain, Genie, and Craftsman openers, both modern WiFi-enabled systems and older units that predate the smart-home era. A remote that stopped working, a wall button with no response, a door that reverses for no reason – each of those points to a different part, and the diagnosis is what separates a $120 fix from a $320 one. Our garage door opener repair page goes deeper on the common failure points.
New Door Installation Pricing in Roxbury
A new garage door installed in Roxbury typically costs $700 – $2,200. The spread is wide because the range covers everything from a basic single-car steel door to a double-wide insulated door with windows. Material, insulation, size, and hardware all move the number. For a closer look at how to choose, our garage door installation page walks through the options.
One thing worth knowing: installation is where brand familiarity pays off. Whether your home has a Clopay, Amarr, Wayne Dalton, Raynor, or another system, we work on the brand you already have. That applies to a full replacement, a single panel, or a part for a door that’s been on the house a while. Panel replacement on its own runs $250 – $500, and it’s often the smarter move when the door works fine and only one section is damaged.
Other Common Repairs and What They Cost
Cable repair runs $130 – $250, track realignment runs $120 – $240, and roller replacement runs $110 – $220. These are the three repairs that come up most often after springs. Cables, like springs, are under tension and belong to a trained technician. Tracks get bent by a car bumper, a bad roller, or a door that jumped the rail, and a realignment is usually quick once access is clear.
Rollers are the quietest failure. They wear out, the door gets louder, and eventually it drags or jumps. Replacing them at the low end of the range is far cheaper than the track and panel damage a worn roller can cause. For a full review of what we handle, see our garage door repair page.
Can You Come Today?
Often, yes. Garage doors are a same-day problem for most Roxbury households – the car is blocked in, or the door won’t close and the house sits open. We offer fast dispatch from 7am to 7pm, and we book early mornings and Sundays for work outside the usual day. We’re closed on Saturday. If a door fails on a Saturday, call and we’ll book you for Sunday.
Two practical notes for today. First, don’t force a door that’s jammed – a bent panel costs more than a repair call. Second, have the door’s make and model handy if you can. It speeds up the diagnosis, especially on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor systems. Call (877) 716-7297 for a free estimate.
Why Parts Access Changes the Price
A lot of garage door pricing comes down to one number: how long it takes to get the part. When a company has to order a spring, a cable, or an opener component from a third party, that wait and that markup get passed to you. We supply garage door parts directly, which means we can often quote a repair at a lower number and get to it sooner. It’s a simple difference – get the part, get it done – and it’s why the ranges on this page hold up in practice.
Brand range matters here too. Working on eight of the most common garage door brands means we’re not stuck when the door in your Roxbury home isn’t the one we see most often. Clopay, Amarr, Wayne Dalton, Raynor, LiftMaster, Chamberlain, Genie, and Craftsman parts all come through the same process.
What to Check Before You Call
A few quick checks help us quote accurately and save you time:
- Does the door move at all? If it won’t budge, suspect a spring or a cable. If it moves but the opener won’t run, suspect the opener.
- Does the opener hum or click without moving? That usually points to the opener itself, not the door.
- Does the door reverse on its own? Check that nothing is blocking the safety sensors near the floor. If they’re clear and it still reverses, it’s a sensor or wiring issue.
- Is the door off the track? Don’t force it back. A bent track needs realignment, and forcing the door can bend a panel.
- Is there a visible gap at the top? That’s a spring that’s already failed.
If any of these point to a spring or cable, stop there. Those parts are under tension and belong to a technician. Call (877) 716-7297 and we’ll take it from there with a free estimate.
FAQs – Garage Door Cost in Roxbury
How much does garage door repair cost in Roxbury?
Garage door repair in Roxbury typically runs $150 – $600, depending on which component failed. Spring repair is $180 – $340 for one spring, cable repair is $130 – $250, and opener repair is $120 – $320. Call (877) 716-7297 for an exact quote – estimates are free.
How much does a spring replacement cost in Roxbury?
A single spring replacement runs $180 – $340. Most doors use a matched pair, and pairs are usually replaced together, so a full set costs about twice that range. Call (877) 716-7297 for an exact quote – estimates are free.
Is it cheaper to repair or replace a garage door?
Repair is almost always cheaper when the door structure is sound. A repair at $150 – $600 beats a new installation at $700 – $2,200, and a panel replacement at $250 – $500 often solves a cosmetic problem without touching the rest of the door. Call (877) 716-7297 for an exact quote – estimates are free.
How much does a new garage door cost installed in Roxbury?
A new garage door installed in Roxbury typically costs $700 – $2,200. The range depends on size, material, insulation, and hardware. Call (877) 716-7297 for an exact quote – estimates are free.
How much does opener repair cost in Roxbury?
Opener repair runs $120 – $320, and a new opener installed runs $250 – $550. A dead remote or sensor usually sits at the low end; a logic board failure sits higher. Call (877) 716-7297 for an exact quote – estimates are free.
Where We Work in Roxbury
We take calls from across Roxbury, including the blocks around Nubian Square, Fort Hill, Mission Hill, Egleston Square, and the neighborhoods near Franklin Park. Door size and garage layout vary widely across these areas, and that’s part of why a diagnosis comes first and a price follows. We also work in the surrounding areas – if you’re nearby, see our Dorchester, Jamaica Plain, Roslindale, and West Roxbury pages for those areas.
Wherever you are in Roxbury, the process is the same: call, describe what the door is doing, get a free estimate, and we take it from there. Our technicians have up to 12 years of experience on systems across all eight major brands we service.
Contact Us for a Free Estimate
If your garage door is stuck, noisy, or just not working the way it should, call (877) 716-7297 for a free estimate. Our team at Hyde Park Garage Door Repair Pros works on the brand you already have, from opener to panel to spring, and we stock and supply parts to keep the timeline short. Every price on this page is a typical estimate, and the written estimate you receive sets the final number. Call today, get a straight answer, and get the door fixed.
Pricing reflects the Roxbury market as of 2026. Hyde Park Garage Door Repair Pros offers free estimates – call (877) 716-7297.
What Our Customers Say
"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
- Laura Walsh"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
- Sarah Norris"The old chain drive sounded like a freight train through the bedroom above the garage. Went with the belt drive they recommended and now I genuinely cannot hear it open from upstairs."
- Jennifer Hayes